How Many Amps Does an Xbox Series X Use?

An Xbox Series X uses about 1.3 running amps at 120 volts (roughly 154 watts). To get your unit's exact draw, divide the nameplate watts by 120: amps = watts / volts. An Xbox Series X draws about 1.3 amps at 120 volts (154 watts) during active gameplay, per Microsoft's own measurements at the wall, and about 123 watts in menus. Its internal power supply is rated 315 watts, but gameplay never uses the full amount. That is a small load that shares any 15A or 20A circuit; you never need a dedicated circuit for a console. Note that Instant-On standby draws about 11-12 watts around the clock; Energy Saver mode nearly eliminates it. Use a surge protector.

An Xbox Series X does not need its own breaker; at 1.3 amps it shares a standard 15A or 20A / 120V circuit (NEC 210.23(B)). Just avoid running it at the same moment as another heavy load on the same circuit. Keep the total continuous load under 80% of the breaker.

Divide the wattage on the nameplate by the voltage: amps = watts / volts. An Xbox Series X at about 154 watts on 120V works out to 154 / 120 = 1.3 amps. The nameplate always governs over a typical value.

Yes. A Series X active gameplay draws about 1.3 amps, while a Series S active gameplay draws about 0.6 amps. See the table above for the range. The rating on the nameplate is the number to size the circuit to.

Same answer: xbox series x is another name for an Xbox Series X. It draws about 1.3 amps at 120V on a shared 15A or 20A circuit. An Xbox Series X draws about 1.3 amps at 120 volts (154 watts) during active gameplay, per Microsoft's own measurements at the wall, and about 123 watts in menus. Its internal power supply is rated 315 watts, but gameplay never uses the full amount. That is a small load that shares any 15A or 20A circuit; you never need a dedicated circuit for a console. Note that Instant-On standby draws about 11-12 watts around the clock; Energy Saver mode nearly eliminates it. Use a surge protector.