Intry Verified receipt

Is the Intry Chiller Purge Pump-Out Leak Check accurate?

The provenance receipt for the Intry Chiller Purge Pump-Out Leak Check: the exact authority its values derive from, the edition they are keyed to, who has final say, and what our automated checks hold them against, rebuilt from their cited source.

Short answer: It computes from the sources listed in the source receipt on its tool page, and our automated checks hold its answers against values written from those sources for the cases the checks cover, not for every input you can enter. Trane's service literature for your CenTraVac and a Section 608-certified technician have final say; the leak repair rules turn on refrigerant added, which the leak-rate calculator applies. Every figure an Intry calculator computes comes from a locked source module, not hand-typed. 30639 automated checks, one suite for the whole site rather than a per-tool count, re-derive the numbers before each deploy from the tables this site transcribed from the Trane CTV-SVX05H-EN Figure 2 purge chart it was read from. This is our own deterministic gate, not a third-party audit. The per-tool receipt is public at https://www.intrysys.com/verified.

The receipt

Calculated from
Trane CTV-SVX05H-EN (August 2020), page 7, Figure 2 · Trane CTV-SVX05H-EN, page 8: what the figure does not give · Trane CVHE-SVX02P-EN (October 2019), CVHE, CVHF, and CVHG Water-Cooled CenTraVac Chillers, Installation, Operation, and Maintenance: Leak Checking Based on Purge Pump Out Time, page 91 · 40 CFR 82.157(a) and 84.106(a)(3)(i); Table 1 to 84.64(b) · The federal rules the refrigerant lines cite. Reused verbatim from the locked engine, never re-written for this page. The documents it rests on are listed in the source receipt on the tool page.
Edition
not a code table
Checked
Before any release, an automated check runs the locked engine that produces these figures and holds its answers against values written from the source it cites, so a checked number answers to its source and not merely to itself. The check covers the cases someone wrote a check for, not every input the tool accepts: it tells you where a number comes from, and it is not a proof of every value. As of the current build that suite holds 30639 checks, and this page has to clear them too. This is our own deterministic gate, not a third-party audit.
Runnable
A reference engine behind the published numbers on this site. Runnable access is offered on the calculators exposed at the Intry MCP endpoint.
Final say
Trane's service literature for your CenTraVac and a Section 608-certified technician have final say; the leak repair rules turn on refrigerant added, which the leak-rate calculator applies.

Frequently Asked Questions

Is the Intry Chiller Purge Pump-Out Leak Check accurate?

It computes from the sources listed in the source receipt on its tool page, and our automated checks hold its answers against values written from those sources for the cases the checks cover, not for every input you can enter. Trane's service literature for your CenTraVac and a Section 608-certified technician have final say; the leak repair rules turn on refrigerant added, which the leak-rate calculator applies. Every figure an Intry calculator computes comes from a locked source module, not hand-typed. 30639 automated checks, one suite for the whole site rather than a per-tool count, re-derive the numbers before each deploy from the tables this site transcribed from the Trane CTV-SVX05H-EN Figure 2 purge chart it was read from. This is our own deterministic gate, not a third-party audit. The per-tool receipt is public at https://www.intrysys.com/verified.


Use it