Intry Verified receipt

Is the Intry Conductor Capacity Check accurate and NEC compliant?

The provenance receipt for the Intry Conductor Capacity Check: the exact authority its values derive from, the edition they are keyed to, who has final say, and what our automated checks hold them against, rebuilt from their cited source.

Short answer: It computes from the NEC sections named below (NEC 2023), and our automated checks hold its answers against values written from those sources for the cases the checks cover, not for every input you can enter. Whether an installation is NEC compliant is decided by the inspector, not by a calculator. Your AHJ and local amendments have final say. Confirm before rough-in. Every figure an Intry calculator computes comes from a locked source module, not hand-typed. 35,938 automated checks, one suite for the whole site rather than a per-tool count, re-derive the numbers before each deploy from the tables this site holds, read from the cited NEC section. This is our own deterministic gate, not a third-party audit. The per-tool receipt is public at https://www.intrysys.com/verified.

The receipt

Calculated from
NEC Table 310.16 · NEC Equation 310.15(B)(1) · NEC Table 310.15(C)(1) · NEC 110.14(C) · NEC 210.19(A)(1) and 210.20(A) · NEC 240.4(D) · NEC 240.6(A) · NEC Table 250.122 · NEC Chapter 9, Table 9 (NEC 2023). Reused word for word from the locked engine, never re-written for this page. The documents it rests on are listed in the source receipt on the tool page.
Edition
NEC 2023
What it reads
  • NEC Table 310.16
  • NEC Equation 310.15(B)(1)
  • NEC Table 310.15(C)(1)
  • NEC 110.14(C)
  • NEC 210.19(A)(1) and 210.20(A)
  • NEC 240.4(D)
  • NEC 240.6(A)
  • NEC Table 250.122
  • NEC Chapter 9, Table 9

Its pages also cite NEC 2023 110.14(A), 310.10(G), 334.80.

Checked
Checked on every build, most recently on November 13, 2026. On every build, an automated check runs the locked engine that produces these figures and holds its answers against the values this site holds, written from the source it cites, so a checked number answers to its source and not merely to itself. The check covers the cases someone wrote a check for, not every input the tool accepts: it tells you where a number comes from, and it is not a proof of every value. As of the current build that suite holds 35,938 checks, and this page has to clear them too. This is our own deterministic gate, not a third-party audit.
Tested safeguards
The breaker it says a conductor takes, whether NEC 240.4(B) permits the breaker in the panel, its warning where that breaker is over the conductor, the ground wire size and its 250.122(B) line, the usable ampacity it states with no load, its filing under Needs action where the table prints no factor, and the reading its saved link reopens to, carry their own safeguards: when the code behind them is broken on purpose, the safeguards catch it.
Source changes
  • October 31, 2026: NEC 2023 110.14(A) added

Sources last changed: October 31, 2026.

Runnable
A reference engine behind the published numbers on this site. Runnable access is offered on the calculators exposed at the Intry MCP endpoint.
Final say
Your AHJ and local amendments have final say. Confirm before rough-in.

Frequently Asked Questions

Is the Intry Conductor Capacity Check accurate and NEC compliant?

It computes from the NEC sections named below (NEC 2023), and our automated checks hold its answers against values written from those sources for the cases the checks cover, not for every input you can enter. Whether an installation is NEC compliant is decided by the inspector, not by a calculator. Your AHJ and local amendments have final say. Confirm before rough-in. Every figure an Intry calculator computes comes from a locked source module, not hand-typed. 35,938 automated checks, one suite for the whole site rather than a per-tool count, re-derive the numbers before each deploy from the tables this site holds, read from the cited NEC section. This is our own deterministic gate, not a third-party audit. The per-tool receipt is public at https://www.intrysys.com/verified.


Use it