Whole-house sizing by Manual J
What Size Air Conditioner for 1,000 Square Feet?
A 1,000 sq ft house built to the 2021 energy code computes 10,139 to 18,438 BTU per hour of cooling by Manual J, depending on its climate zone. Here are those runs, what Carrier's and DOE's rules of thumb say beside them, and the calculator for your own house at your ZIP code.
The Numbers for 1,000 Sq Ft
Swipe the table sideways to see the rest of its columns. →
| Manual J cooling load, DOE's 2021 house across the IECC zones (our engine), and the Manual S size | 10,139 to 18,438 BTU/hr; 1 to 1.5 ton; no single-speed size fits the Manual S window in 1 zone |
| Cooling capacity (Carrier's 20 BTU per sq ft) | 20,000 BTU/hr |
| Tonnage (Carrier's 12,000 BTU per ton) | 1.67 ton |
| Nominal step inside the ACCA Manual S window | 1.5 tons, the step on this site's nominal tonnage ladder closest to 20,000 BTU inside the ACCA Manual S 90-115% window (90% of it; the step is this site's screening pick, not Carrier's) |
| DOE's figures at this size (very efficient house; “commonly used estimate”) | 12,000 - 15,000 BTU; 24,000 - 30,000 BTU |
| Equipment the source names | Carrier's sizing page names a 2-ton unit (24,000 BTU) for 1,000 to 1,200 sq ft |
The first row is our Manual J engine on DOE/PNNL's 2021 reference house at this floor area, one run per IECC zone at the ASHRAE station nearest DOE's model site, as the BTU per square foot chart prints it with every assumption. The rule-of-thumb figure is Carrier's 20 BTU per sq ft of living space (Carrier, What Size Air Conditioner Do I Need?, read 2026-11-12). The U.S. Department of Energy says the “commonly used estimate” of one ton per 400 to 500 sq ft “fails to take into account local climate and the efficiency of a house”; at 1,000 sq ft that estimate is 24,000 to 30,000 BTU, and in a very efficient house, where DOE says one ton can condition 800 to 1,000 sq ft, it is 12,000 to 15,000 BTU. DOE says: “Your contractor should use the Air Conditioning Contractors of America (ACCA) Manual J to calculate the proper size of HVAC equipment.” (DOE/EE-2464, page 1). Run the Manual J load calculator for this house, or the estimate below.
Estimate Your Exact Load
Enter your ZIP code, insulation, windows, air tightness and duct location for ACCA Manual J's load at your weather station and the size Manual S points to.
Frequently Asked Questions
What size AC does a 1,000 square foot house need?
Our ACCA Manual J engine on DOE's 2021 code-built reference house at 1,000 sq ft computes 10,139 to 18,438 BTU per hour of cooling, 1 to 1.5 ton by the Manual S single-speed window, from zone 8 (FAIRBANKS) to zone 2A (MACDILL AFB), in the 15 of 16 zone runs where Manual J's printed tables reach the station. No single-speed size lands inside the Manual S window in 1 of those runs (zone 8, FAIRBANKS), so the ton span is the other 14. Your ZIP code and your house move it: the calculator on this page runs them. Carrier's rule of thumb of 20 BTU per square foot gives 20,000 BTU (1.67 tons), and The U.S. Department of Energy says the “commonly used estimate” of one ton per 400 to 500 sq ft “fails to take into account local climate and the efficiency of a house”; at 1,000 sq ft that estimate is 24,000 to 30,000 BTU, and in a very efficient house, where DOE says one ton can condition 800 to 1,000 sq ft, it is 12,000 to 15,000 BTU. DOE says: "Your contractor should use the Air Conditioning Contractors of America (ACCA) Manual J to calculate the proper size of HVAC equipment."
How many BTU for a 1,000 sq ft house?
Our ACCA Manual J engine on DOE's 2021 code-built reference house at 1,000 sq ft computes 10,139 to 18,438 BTU per hour of cooling, 1 to 1.5 ton by the Manual S single-speed window, from zone 8 (FAIRBANKS) to zone 2A (MACDILL AFB), in the 15 of 16 zone runs where Manual J's printed tables reach the station. No single-speed size lands inside the Manual S window in 1 of those runs (zone 8, FAIRBANKS), so the ton span is the other 14. Carrier's sizing page gives "the general rule of thumb is to allot 20 BTUs of cooling capacity for every square foot of living space", which is 20,000 BTU for 1,000 sq ft, and adds that ceiling height, insulation and local climate change the size you need. The U.S. Department of Energy says the “commonly used estimate” of one ton per 400 to 500 sq ft “fails to take into account local climate and the efficiency of a house”; at 1,000 sq ft that estimate is 24,000 to 30,000 BTU, and in a very efficient house, where DOE says one ton can condition 800 to 1,000 sq ft, it is 12,000 to 15,000 BTU.
Can I size a whole house by square feet alone?
Only as a ballpark. A post on ACCA's HVAC Blog reports 40 Manual J load calculations in hot and mixed climates that ranged from 624 to 3,325 sq ft per ton, and says: "No matter the number, you can’t use square feet per ton to size air conditioners." For equipment you are going to buy and install, run a Manual J load calculation. Oversizing short-cycles the system and leaves the house humid; undersizing cannot keep up on design days.
Other Sizes
200 sq ft
6,000 BTU (0.50 ton).
300 sq ft
7,000 BTU (0.58 ton).
400 sq ft
9,000 BTU (0.75 ton).
500 sq ft
12,000 BTU (1.00 ton).
600 sq ft
14,000 BTU (1.17 ton).
All Sizes + Calculator
The full ENERGY STAR table, the whole-house Manual J runs with Carrier's and DOE's rules beside them, and the load calculator.